Harbin Rainbow Technology CO.,Ltd.
video site
Button Text
Button Text
NEWS
RBF254L Six-Station Cold Forging Machine
Source: | Author:Vickey | Published time: 2026-10-30 | 84 Views | 🔊 Click to read aloud ❚❚ ▶ | Share:

RBF254L Six-Station Cold Forging Machine

The RBF254L six-station cold forging machine is a high-performance automatic multi-die cold forming equipment from the RBF series, specially engineered for mass production of large-size standard and non-standard fasteners, including heavy bolts, studs, special-shaped pins and stepped parts. It is widely adopted in fastener factories supporting automotive, wind power, construction and heavy machinery industries, delivering stable, repeatable chipless cold forging results.

Working Principle

The machine adopts a fully automatic continuous cold forming process at room temperature without heating the raw wire rod. First, the wire feeding system straightens and feeds carbon steel, alloy steel or stainless steel wire into the cutting station, where the circular shear cuts the wire into blanks of fixed length. The precision conjugate-cam gripper system transfers each blank sequentially to six independent forming stations. Every station carries out one dedicated forming operation step by step: pre-upsetting, preliminary forming, extrusion, shaping, piercing and final trimming. The blank stays in the die set and is progressively deformed by punch impact, until it achieves the target outline, head shape and shank dimension. After forming, the finished workpiece is ejected by the rear knockout mechanism and discharged. All movements of feeding, cutting, gripping, forging and knockout are synchronously driven by the main crankshaft system and controlled by PLC, so each forming cycle runs in precise coordination without manual intervention.

Core Functions

  1. Multi-step integrated cold forming: It can complete complex forming procedures that traditional 3-station or 4-station cold headers cannot realize, such as large upsetting ratio, multi-step shank, under-head groove and special head geometry in one machine.

  2. Continuous mass production of heavy fasteners: Suitable for large-diameter bolts and high-strength structural fasteners, matching the front-end wire drawing line and back-end mesh belt heat treatment furnace to form a complete fastener production line.

  3. Material saving & chipless forming: Cold forging keeps the original metal grain flow continuous, material utilization rate above 98%, greatly reducing scrap compared with turning machining.

  4. Material compatibility: Process carbon steel, alloy steel, stainless steel, copper and aluminum for different strength-grade fasteners.

  5. Online monitoring and safety interlock: It supports blank shortage detection, overload protection, pressure monitoring and automatic alarm. If wire feeding fails or overload occurs, the machine stops immediately to protect dies and main body.

Advanced Features

  1. Six-station flexible forming layout: Compared with 4-station models, extra stations reserve forming capacity for complicated non-standard parts. Customers can arrange the process freely to split deformation load, lower single-station forging pressure and extend mould service life.

  2. Heavy-duty one-piece cast iron frame: High-rigidity machine body suppresses vibration during long-cycle heavy forging, guarantees stable precision even under 24-hour continuous operation, and minimizes dimensional deviation among workpieces.

  3. Compound pneumatic gripper mechanism: Grippers support translational opening and turnover opening, with adjustable clamping force. High-speed transfer runs reliably, and misfeed or short blank will trigger automatic alarm and stop.

  4. Air clutch + variable frequency speed regulation: The air clutch realizes inching jog mode for die setup and maintenance; variable frequency drive allows adjustable production speed according to workpiece material and complexity, protecting motor and transmission components.

  5. Independent adjustable knockout for each station: Each station’s knockout stroke can be adjusted separately, convenient for process debugging for different bolt lengths and shapes.

  6. High consistency of mechanical performance: Cold forming optimizes internal metal grain structure, finished fasteners gain better tensile strength and fatigue resistance, fully meeting the requirements of Grade 10.9 and 12.9 high-strength fasteners.

Application

RBF254L is the preferred forming equipment for factories focusing on heavy-duty high-strength fasteners. Combined with heat treatment, thread rolling and surface treatment, it supplies reliable fastener products for new energy, wind power, engineering machinery and bridge construction.


Company address:No. 1560-2 chuangxin 2nd road, songbei district, Harbin.

Mailbox:chen@rainbowtechnology.net

+86-451-51066797