Harbin Rainbow Technology CO.,Ltd.
video site
Button Text
Button Text
NEWS
Mesh Belt Heat Treatment Furnace for Fasteners
Source: | Author:Vickey | Published time: 2026-10-30 | 58 Views | 🔊 Click to read aloud ❚❚ ▶ | Share:

Mesh Belt Heat Treatment Furnace for Fasteners

A mesh belt heat treatment furnace is a continuous, atmosphere-controlled thermal processing line specially developed for mass production of fasteners such as bolts, nuts, screws and studs. It is the core equipment to realize automatic hardening, tempering and carburizing of fasteners, and widely adopted in fastener factories for stable, repeatable heat treatment results.

Working Principle

This furnace uses high-temperature resistant alloy mesh belt as the conveying carrier. Fasteners are evenly distributed on the mesh belt by automatic feeding device, and travel through multiple independent functional zones at a controllable constant speed. The whole furnace chamber is sealed and filled with protective atmosphere (nitrogen-methanol mixed gas or ammonia decomposition gas) to isolate oxygen and avoid surface oxidation and decarburization of steel fasteners during heating.

The standard process flow follows this sequence:

  1. Preheating zone: Fasteners are heated gradually to reduce thermal shock and prevent cracking.

  2. Austenitizing & soaking zone: Workpieces are heated to the target austenitizing temperature (840–900°C for most high-strength bolts) and kept for a fixed soaking time, so the internal steel structure fully transforms into austenite. Multi-zone PID temperature control guarantees even temperature distribution inside the chamber.

  3. Quenching zone: After soaking, fasteners drop into quenching medium (quenching oil, polymer liquid or water) for rapid cooling. Fast cooling converts austenite into martensite to obtain required hardness.

  4. Cleaning zone: Quenched fasteners go through spray washing to remove residual quenchant.

  5. Tempering zone: Parts are reheated to 400–550°C for tempering. This step releases quenching residual stress, lowers brittleness and balances hardness and toughness.

  6. Discharging: Finished fasteners are output continuously for inspection and packaging.

Belt speed, temperature of each zone, atmosphere flow and quenching parameters can be adjusted via PLC system according to fastener material, size and strength grade (such as Grade 8.8, 10.9, 12.9). Every batch of fasteners gets identical thermal history for consistent mechanical performance.

Functions

  1. Hardening: Raise surface and core hardness of carbon steel and alloy steel fasteners to meet strength requirements for structural assembly.

  2. Tempering: Eliminate internal stress generated in quenching, improve impact toughness and avoid delayed fracture of high-strength fasteners.

  3. Controlled atmosphere protection: Prevent oxidation and decarburization, keep bright surface and stable thread precision, reduce follow-up shot blasting workload.

  4. Carburizing (optional): For low-carbon steel screws, the furnace can run carburizing process to form a hard surface layer while keeping a tough core.

  5. Continuous mass production: Realize unmanned automatic flow line production, greatly lifting output compared with batch furnaces, suitable for large-volume fastener orders.

Main Advantages

Compared with box furnaces or bell furnaces, the mesh belt heat treatment furnace features stable quality, small hardness deviation between parts, simple operation and low labor cost. It matches perfectly with upstream cold heading and thread rolling lines, forming a complete fastener manufacturing chain for automotive, construction, machinery and wind power industries where fastener reliability is critical.


Company address:No. 1560-2 chuangxin 2nd road, songbei district, Harbin.

Mailbox:chen@rainbowtechnology.net

+86-451-51066797